Company's Website: http://www.made-in-china.com/showroom/2017fcard
Introduction:
   FC-2080 is a professional intelligent guard tour designed by FCARD company in order to make the inspection and management more effective. It is a new brand product for scientizing and standardizing security guard work, provide effectively scientific management solution that integrated human guard and technology guard.

   FC-2080 intelligent guard tour is data collector in guard tour system, the security guard takes it with, records the time of reaching every site, then data analysis and saved by computer used for guard tour attendance, performance review, attendance reports and etc.

   Guard tour system including: guard tour, USB cable ( recharge and transfer),Charger,personal button, check point and software. 


Product Feature:
1. Adopt the RFID technology,
2. Sound and vibrate when reading card.
3. Professional LCD display
4. Support 100,000 records super large memory.
5. USB cable for data exchange and charging.
6. LED flashlight.
7. Metal housing, waterproof, anti-vibration and anti-low temperature


Technical Parameter:
Model:FC-2080
Working Voltage:-20ºC-70ºC
Operational Humidity:5%-9%
User Capacity:999
Card Capacity:100,000

Identification speed:<0.1s
Communication Way:USB
Charge Way:by USB
Battery:3.6V battery
Size:150mm x 45mm x24mm


Notice:
1.For the guard tour that newly bought or three months not used, please charge it at least 8 hours, make sure that the power is sufficient.
2.Before the inspection work, please set the security guard's staff number, make sure that the guard tour records corresponding with staff.
3.When the guard tour successfully identify the site, it will emit prompt of the sound and vibration, and the record data is automatic to saved.
4.After opening the Guard Tour, when no operations in a period of time, the device will enter standby mode automatically.
5.In boot-up state, press the key " flashlight", the flashlight is on, press the key again, the flashlight is off, if not press, the flashlight also will be off after a period of time ( default: 5s, light on time 1-60s adjustable ), flashlight consumes power a lot, suggest adjust the light on time in proper span.
6.After opening the guard tour, press the key " records query" to check records, press left and right to turn page.
7.After opening the guard tour, press the key " staff number " query, press left and right to view the staff number.
8.The mini end of the communication cable connect to guard tour USB port, the other end connect to computer, without any other operations, the guard tour can communicate with computer.
9.Most of computers do not need install the drive, but some may need. The drive is placed in guard tour system installation directory. ( the guard tour drive installation method, please refer the computer's )
10.Please use the packaged charger to charge the device, the charge effect is better. If use the computer USB port to charge, some computers' USB current is too low, it will appear phenomenon of pretended charge, slow charge, and overcharge.
11.If the guard tour does not have any personal information, after opening device, the staff number in monitor will blink.
12.During attendance, the distance of guard tour to site button should be kept within 2cm, it can not identify the site button if too far.
13.When the memory space less than 10%, after opening, the records in monitor will blink. Please upload the data to computer.
14.Because the device has precise electronics component and circuit, please do not use guard tour to knock hard objects or immerse into water, it will lead damage to device.
15.The device adopt the RFID technology, when identify the site button, make sure there are no metal object in middle, or will affect the identification.
Please do not disassemble or modify the device without permission, avoid causing damage to device.